Driver OMRON Fins¶

BrowseName: OmronFinsDriver
SuperType: Driver di comunicazione (CommunicationDriver)

Driver per la comunicazione con PLC OMRON Fins.

Proprietà¶

Nome	BrowseName	DataType	Descrizione
Station ID	StationID	Byte
Network Address destinazione	DestinationNetworkAddress	Byte	Default value = 0. It corresponds to the FINS parameter named «Network Address». It can be set to 0 if the PC and all the devices are on the same network. If there are more network levels, using gateway devices, you should specify the network number (valid value are in 1-127 range).
Node Address destinazione	DestinationNodeAddress	Byte	Default value = 0. Correspond to the FINS parameter «Node address». It depends on the FINS net configuration. Usually it corresponds to the last octet of the PC Ethernet card IP address, i.e. if 192.168.0.38 is the PC IP address, use 38 as node number.
Unit Address destinazione	DestinationUnitAddress	Byte	Default value = 0. It corresponds to the FINS parameter named «Unit Address». Should be left to zero.
Protocollo	Protocol	OmronFinsDriverProtocol	Modalità protocollo: Ethernet o seriale
Porta seriale	SerialPort	String
Baudrate	Baudrate	UInt32
Data size	DataSize	Byte
Parity	Parity	Parity
Stop bits	StopBits	StopBits
Flow control	FlowControl	FlowControl