Station OMRON Fins¶
Proprietà¶
Nome |
BrowseName |
DataType |
Descrizione |
---|---|---|---|
Dimensione massima job in bytes | MaximumJobSizeInBytes |
Dimensione massima in byte di una trasmissione di tag dal PLC. 0 = 1024 byte (valore massimo). |
|
Massimo gap in bytes | MaximumGapInBytes |
Distanza massima in byte tra due tag, per far parte della stessa trasmissione. |
|
Network Address sorgente | SourceNetworkAddress |
Default value = 0. It corresponds to the FINS parameter named «Network Address». It can be set to 0 if the PC and all the devices are on the same network. The range of valid values is: 0..127. |
|
Node Address sorgente | SourceNodeAddress |
Default value = 50. It corresponds to the FINS parameter named «Node Address». The range of valid values is: 0..254. Usually it corresponds to the last octet of the PLC Ethernet card IP address, i.e. if 192.168.0.54 is the PLC IP address, use 54 as node number. |
|
Unit Address sorgente | SourceUnitAddress |
Default value = 0. It corresponds to the FINS parameter named «Unit Address.». If the communication is with the PLC CPU, the Unit Number should be 0. |
|
Indirizzo IP | IPAddress |
Indirizzo univoco per raggiungere il PLC in rete |
|
Porta | Port |
Default value = 9600. This is the number of the TCP port of the device to be connected to. Valid port numbers range from 1 to 65535. Since FINS protocol requires that the source and destination port number be the same, if this parameter is modified, the Local Bound Port parameter should be modified as well and the two values must be equal. |
|
Timeout | Timeout |
Tempo massimo di attesa in millisecondi per ricevere una risposta dal PLC. |
|
Tipo di ottimizzazione | OptimizationType |
Select Datablock when working with consecutive addresses. Mixed Data otherwise. |
|
Codice operazione | OperationCode |
(Ereditato da Station di comunicazione) |
|
Tags |
(Ereditato da Station di comunicazione) |
||
Types |
(Ereditato da Station di comunicazione) |